SilverStone SST-SG06B Especificações

Consulte online ou descarregue Especificações para Unidades de alimentação SilverStone SST-SG06B. Silverstone SST-SG06B power supply unit Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 16
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
SUGO SERIES
SG06
Vista de página 0
1 2 3 4 5 6 ... 15 16

Resumo do Conteúdo

Página 2 - Product Overview

Install your graphics card or expansion card.Установите графическую карту или карту расширения.Installieren Sie Ihre Grafik- oder andere Expansionskar

Página 3 - PICTURE ITEM PURPOSE

After all cables and wirings are connected, reinstall the top cover and secure it.Подключите все необходимые провода и кабели, после чего поставьте на

Página 4

Installation complete. Установка завершена.Die Installation ist vollständig.Installation terminée.Instalación completa.㉘㾌ᴴ 㝸⨀╌㛼㏩⏼␘. Installazione comp

Página 5

Press the area as shown to release the clips, then remove the front panel.Нажмите на указанные зажимы и снимите переднюю панель.Drücken Sie auf die St

Página 6

Remove the 4 screws holding the fan, and remove the fan from the interior of the chassis. Then reinstall the chassis by following the previous steps i

Página 8

April,2009G11209770

Página 9

1Product OverviewMaterialModelMax. DC Output 300WLoad RangeMotherboardDrive BayCooling SystemMax.(Amps)Peak (Amps)Min.(Amps)Range (%)Ripple(mVp-p) Com

Página 10

2USB2.0 CONNECTORAC’97 CONNECTORHD AUDIO CONNECTORUSB+5V USB+5VLP-LP+GNDLP-LP+GNDPINPINNCPINAUD GND PORTILPORT1RPORT2RPORT2RPINPRESENCESENSE1_RETURNSE

Página 11

Remove the screws holding the hard drive bracket with a screw driver as shown, then remove the cage outward from the chassis.С помощью отвертки открут

Página 12

Press the area as shown to release the clips, then remove the front panel.Remove the screws holding the optical drive bracket with a screw driver as s

Página 13

Remove the tab of optical drive bay with a screw driver.Pull the clip apart to remove the slim optical drive cover.Чтобы снять крышку тонкого оптическ

Página 14

Install your motherboard into the chassis as shown and secure with included screws.Установите материнскую плату в корпус и закрепите ее прилагаемыми ш

Página 15

Install your 2.5” hard drive onto the optical drive bracket as shown and secure with included screws. (the maximum thickness of 2.5” hard drive is 15m

Página 16 - G11209770

Install your 3.5” hard drive onto the bracket as shown and secure with screws, then reinstall the bracket into the chassis and secure with screws.Уста

Comentários a estes Manuais

Sem comentários